Sensors / Aeotec

Aeotec MultiSensor 7 (ZWA024-B, AU radio)

Motion, vibration, temperature, humidity, light and UV sensing. USB or two CR123A batteries; repeats Z-Wave only on USB power. Manufacturer product-code table identifies ZWA024-B as the AU variant and lists V1.6.7; this is a published version reference, not verification of the delivered unit firmware.

Listed in Australia
Check with my setup ↗

Plan this device in a room ↗

Aeotec MultiSensor 7 (ZWA024-B, AU radio) — manufacturer-supplied product image.

Photo: Aeotec

Connections: Z-Wave

What it can do

  • Official setup guide provides SmartThings, Home Assistant/Z-Wave JS and Hubitat pairing steps.

Shared setup

  • Requires a compatible Z-Wave hub on the matching regional frequency. Other regional radios are not interchangeable.
  • Pair with the specified bridge: Requires a compatible Z-Wave hub on the matching regional frequency. Other regional radios are not interchangeable.

Features and the setup they need.

Features, setup and recorded confirmation
Feature & setupConfirmation & sources

Detect motion

Device feature

✓ Manufacturer confirmed

aeotec.freshdesk.com · 2026-10-25

Measure room conditions

Device feature

✓ Manufacturer confirmed

aeotec.freshdesk.com · 2026-10-25

SmartThings integration

SmartThings

✓ Manufacturer confirmed

aeotec.freshdesk.com · 2026-10-25

Home Assistant integration

Home Assistant

What you’ll need

  • Use a Home Assistant installation with the documented exact-model integration.
✓ Manufacturer confirmed

aeotec.freshdesk.com · 2026-10-25

Hubitat integration

Device feature

✓ Manufacturer confirmed

aeotec.freshdesk.com · 2026-10-25

Where we checked

Features are based on the linked manufacturer documentation. Household results also check the equipment and software you select. How we check.